Free HP HPE6-A85 Exam Questions
Try our Free Demo Practice Tests for Comprehensive HPE6-A85 Exam Preparation
-
HP HPE6-A85 Exam Questions
-
Provided By: HP
- Exam: Aruba Certified Campus Access Associate
- Certification: HPE Aruba Certified
-
Total Questions: 105
-
Updated On: Mar 27, 2025
-
Rated: 4.9 |
-
Online Users: 210
-
Question 1
-
You have been asked to onboard a new Aruba 6300M in a customer deployment You are working remotely
rather than on-site You have a colleague installing the switch The colleague has provided you with a remote
console session to configure the edge switch You have been asked to configure a link aggregation going back
to the cores using interfaces 1/1/51 and 1/1/52 The Senior Engineer of the project has asked you to configure
the switch and 1Q uplink with these guidelines
1. Add VLAN 20 to the local VLAN database with name Mgmt
2. Add L3 SVl on VLAN 20 for Management using address 10 in the 10.1.1 0/24 subnet 3. Add LAG 1 using
LACP mode active for the uplink
4 use vlan 20 as the native vlan on the LAG 5. Make sure the interfaces are all ON.
Which configuration script will achieve the task?
Answer: C
-
You have been asked to onboard a new Aruba 6300M in a customer deployment You are working remotely
rather than on-site You have a colleague installing the switch The colleague has provided you with a remote
console session to configure the edge switch You have been asked to configure a link aggregation going back
to the cores using interfaces 1/1/51 and 1/1/52 The Senior Engineer of the project has asked you to configure
the switch and 1Q uplink with these guidelines
1. Add VLAN 20 to the local VLAN database with name Mgmt
2. Add L3 SVl on VLAN 20 for Management using address 10 in the 10.1.1 0/24 subnet 3. Add LAG 1 using
LACP mode active for the uplink
4 use vlan 20 as the native vlan on the LAG 5. Make sure the interfaces are all ON.
Which configuration script will achieve the task?
-
Question 2
-
You are working with a pair of 6300M switches in a VSF stack. The switch has 48 SmartRate 5G ports,
2 SFP28 ports, and 2 SFP56 ports. Both SFP56 ports are used for stacking.
You need to provide an LACP connection to another identical stack with the maximum available
bandwidth possible. What should you configure?
Answer: A
-
You are working with a pair of 6300M switches in a VSF stack. The switch has 48 SmartRate 5G ports,
2 SFP28 ports, and 2 SFP56 ports. Both SFP56 ports are used for stacking.
You need to provide an LACP connection to another identical stack with the maximum available
bandwidth possible. What should you configure?
-
Question 3
-
What happens when the signal from an AP weakens by being absorbed as it moves through an object?
Answer: C
-
What happens when the signal from an AP weakens by being absorbed as it moves through an object?
-
Question 4
-
When using the network check page in Central, what kind of tests can you run on switches? (Select
two.)
Answer: B,E
-
When using the network check page in Central, what kind of tests can you run on switches? (Select
two.)
-
Question 5
-
You are working with a pair of 6300M switches in a VSF stack. The switch has 48 SmartRate 5G ports,
2 SFP28 ports, and 2 SFP56 ports. Both SFP56 ports are used for stacking.
You need to provide an LACP connection to another identical stack with the maximum available
bandwidth possible. What should you configure?
Answer: A
-
You are working with a pair of 6300M switches in a VSF stack. The switch has 48 SmartRate 5G ports,
2 SFP28 ports, and 2 SFP56 ports. Both SFP56 ports are used for stacking.
You need to provide an LACP connection to another identical stack with the maximum available
bandwidth possible. What should you configure?